Cast Steel Shot, Metal Abrasive, Stainless Steel Shot

We all know that Stainless Stainless Steel Shot is the main consumable of the workpiece in the process of shot blasting. The wear of good high-quality Stainless Stainless Steel Shot is a slow process. After the Stainless Stainless Steel Shot is accelerated by the shot blasting machine, it hits the surface of the workpiece without a single impact. , the Stainless Stainless Steel Shot is deformed once, and will fall off a layer of metal. The shape of the Stainless Steel Shot is similar to a football, which is a polygon. The impact effect on the casting in each direction is also equal. After many times of impact, the Stainless Steel Shot keeps getting smaller. , when it is small to a certain extent, it will be sucked away by the dust collector, or separated by the pellet sand separation device. The shot blasting separator is the brain of the shot blasting machine. This metaphor shows its importance in the whole set of shot blasting equipment. During the working process of the shot blasting machine, the working performance of the shot blasting machine will directly affect the cleaning efficiency. and cleaning costs. The work of shot sand separation is to separate the impurity sand from the casting and the Stainless Steel Shot that has been ground to a small size or has been crushed from the normally used Stainless Steel Shot, which ensures the cleaning efficiency and reduces the wear of the shot blasting machine. When the shot blasting machine is working, sand is the main cause of equipment wear. According to statistics, every 2% increase in sand will reduce the life of wearing parts by half.
The roughness of the casting surface after shot blasting is closely related to the strength and projection speed of the Stainless Steel Shot used. The higher the roughness, the lower the surface roughness obtained by the mixed use of stainless Stainless Steel Shot with multiple particle sizes than the Stainless Steel Shot with a single particle size.